Ground Granulated Blast Furnace Slag (GGBS or GGBFS) is obtained by quenching molten iron slag (a by-product of iron and steel-making) from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. It is suitable for applications in marine environment, mass concreting and sulphate environment, water retaining structures, basement and other structures which require low heat of hydration.

GGBFS is off-white in color and substantially lighter than Portland cement. The whitish color is also observed in concrete made with GGBS, especially at addition of 50% and above. The more pleasing appearance of GGBFS concrete can help soften the visual impact of large structure such as bridges, retaining walls, etc.

We are engaged in offering quartz products such as White Quartz. High purity quartz become a strategic raw materials for the high-tech industry. Silica glass melted out of high purity quartz offers a wide range of exceptional optical, mechanical and thermal properties which are essential for manufacturing many high-tech products in areas such as semi-conductor technologies, high temperature lamp tubing, telecommunications and optics.

The high purity quartz can be applied as crucibles for semi conductor and solar, optical halogen lamps, quartz wool, quartz glass, fillers and silicon metal and refractory.

We produce Quartz in the Forms of:

Granule Particles
Powder (150-25 microns), 100, 200, 325, 500 Mesh
Lumps form 15 mm to 150 mm

Red Iron Oxide Powder- is a unique natural red hematite produced through beneficiation & fine grinding of our exclusive domestic ore body. Red Iron Oxide hematite is light fast, chemically stable & color controlled within narrowly defined parameters. This product may be used Paints, Roofing tiles, Asphalt, Concrete products, Sand lime bricks, Paper and cardboard, Plastic, Rubber products, Artificial leather, Wood stain Floor and shoe polish, Cattle and poultry feed, Fertilizers, Glass, Ceramics in as well as many other applications requiring a cost effective, easily dispersed Natural Red Iron Oxide.
Red Oxide, Iron Oxide, Red Oxide Lumps, Red Oxide For Paint, Metal Primer

Lime stone contains a naturally occurring amount of calcium carbonate greater than 95%. Typically, the next major defining specification is magnesium carbonate or magnesium oxide and that is limited to less than 5%. Chemical Composition. Calcium Carbonate - 93 to 97, Impurities includes : Silica, Magnesium, Alumina & Ferrous.

Additional Information:

Item Code: CaCo3
Minimum Order Quantity: 300 Metric Ton

We are the importers of Natural Gypsum and supply to max cement industries. Gypsum is crystalline Calcium Sulphate. It occurs mainly in soft white massive deposits.

Chemical Formula: CaSO4, 2H2O

Physical Properties:

Appearance White Crystalline Powder
Oil Absorption 18- 22%
Sp. gravity 2.9 - 3.0%

Applications:

For making plaster of Paris which is used for interior decorations
For manufacturing Anhydrous Calcium Sulphate

Calcium oxide (CaO), commonly known as burnt lime, caustic lime, lime or quicklime, is a widely used chemical compound. Quicklime, is obtained by calcining (controlled heating - time and temperature) limestone at temperatures above 900 °C. This highly reactive product is essential to many industrial processes It is a white, caustic and alkaline crystalline solid. As a commercial product lime often also contains magnesium oxide, silicon oxide and smaller amounts of aluminum oxide and iron oxide.Quick Lime Powder,Quick Lime Powder for Bricks plant.
Chemical formula: CaO

We provide ultimate end to your search of high quality Quartz Powder. The Quartz Stone Powder,Quartz Powder we deliver, is free from all impurities and rich in mineral content. The Quartz Stone Powder comes in various grades and we also procure various quality certifications enabling us to bring our name among the leading Natural Quartz Powder Exporters and Suppliers from India. The Quartz Stone Powder we deliver has a very wide application in various industries like paint, soap, cosmetic, pharmaceuticals, paper, etc.

In ceramic bodies, the main vitrifying (fluxing) agent is Potash Feldspar. The majority of white ware bodies contain good proportions of feldspar. It acts as a flux. In the ceramic industry, the flux is defined as that portion of the body which develops glass phase. This is provided mostly by feldspar. The amount of flux in a ceramic body should be only in such a proportion as to develop the desired amount of vitrification. If excess of flux is added, the fired body becomes very glassy and consequently, brittle.

Feldspar is generally used for Ceramics, Glass, Electrodes.

We are of the most prominent names in the industry for manufacturing and exporting of high quality natural products like Silica Sand which is used in many applications like glass, crystal, foundry, painting, oil & gas, stamped concrete, water filtration, plastering, sand plastering and many more applications. Manufacturing of these products is done using advanced technology machines and strictly under international quality parameters. The sound infrastructure of our company enables us to manufacture the best quality silica sands to provide best quality solutions to their clients.

Hydrated Lime (or calcium hydroxide, or slaked lime) is usually a dry powder resulting from the controlled slaking of quicklime with water. The exothermic or released heat of reaction is captured and used to evaporate the excess slaking water.

Chemical formula: Ca(OH)2 

Chemical composition of Hydrated Lime available in each grade.

Hydrated Lime having higher percentage of Calcium Hydroxide ( 90%) over low grade (65% Purity) Hydrated Lime

Specifications:

Reduced reaction time: The rate of chemical reaction depends upon the degree of purity of the Chemical being used. Higher the purity, lesser would be the reaction time.
Reduced consumption: By Quantitative Analysis it is established that 1 mt. of 90% grade Hydrated Lime is equivalent to 1.378 mt. of 65% purity Grade. Thus there is a reduction of 37.8% in consumption.

Description / Specification of Quartz Sand

We are involved in offering a wide range of Quartz Sand to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Quartz Sand. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Owing to the immense experience and a competent team of experts, we are able to offer Coated Ground Calcium Carbonate (GCC) Powder to respectable clients. These coated grounded calcium carbonate offered by us are processed utilizing high grade ingredients at trustworthy vendors premises. In addition to this, the offered range of coated ground calcium carbonates is suitably checked on different parameters to ensure its adherence with the international quality norms and standards.

In ceramic bodies, the main vitrifying (fluxing) agent is Soda Feldspar. The majority of white ware bodies contain good proportions of feldspar. It acts as a flux. In the ceramic industry, the flux is defined as that portion of the body which develops glass phase. This is provided mostly by feldspar. The amount of flux in a ceramic body should be only in such a proportion as to develop the desired amount of vitrification. If excess of flux is added, the fired body becomes very glassy and consequently, brittle. 

The glass and ceramic industries are the major consumers of feldspar and account for 95% of the total consumption. 

We own mines at Bagalkot dist. Karnataka. Supply to companies like Kalyani Steels Ltd., JSW, Kirloskar ferrous industries ltd etc Natural Dolomite is a carbonate of calcium and magnesium. It has fine crystalline structure with high brightness. Dolomite has extensive application in steel plant, ceramic tiles, plastics and paper. It has very good exterior durability and so it has good application in paints.

The role of Ramming Mass in steel melting through induction Furnace is very important. Due to its important property to with stand thermal shocks without developing any cracks due to interrupted powder supply which is the case throughout our country We have taken initiative to develop acidic ramming mass of high quality silica Quartz having heavy density.

Product:

Our ramming mass is a product of super snow white crystalline quartz having 99.90% Silicon dioxide (SiO2) and manufactured under strict quality control and calcites to eliminate the scaling tendency in stabilized form, where silica neither expands nor contracts It is suitable for with standing higher temperature up to 720°C